Audio Status Screen; Video Status Screen; Button/Remote Status Screen - Sony PMW-200 Operating Instructions Manual

Audio Status Screen

Output CH: External output/headphone output
Depending on the setting of "Output CH" in
"Audio Output" in the AUDIO SET menu and the
setting of "Monitor CH," the audio channel(s)
external output and headphones output is
displayed as follows.
• CH-1: When left/right are CH-1
• CH-2: When left/right are CH-2
• CH-3: When left/right are CH-3
• CH-4: When left/right are CH-4
• CH-1/CH-2: When left is CH-1 and right is CH-
2 (stereo)
• CH-3/CH-4: When left is CH-3 and right is CH-
4 (stereo)
• CH-1+CH-2: When both left and right are CH-
1 and CH-2 (monaural)
• CH-3+CH-4: When both left and right are CH-
3 and CH-4 (monaural)
Speaker: Speaker output
The audio channel(s) output to the internal
speaker is displayed.
As the speaker is monaural, CH-1+CH2 or CH-
3+CH-4 is displayed when "Monitor CH" is set to
stereo. With non-stereo settings, the setting of
"Monitor CH" in "Audio Output" in the AUDIO
SET menu is displayed as it is.
CH-1/CH-2/CH-3/CH-4: Audio level meters
The 4-channel audio level meters (2 meters when
using 2-channel settings) are displayed.
While recording (or standing by to record), the
level of the audio inputs (the EE audio levels) are
displayed. During playback, the audio playback
level is displayed according to the setting of
"Output CH" in "Audio Output" in the AUDIO
SET menu.
If audio is input from the i.LINK (HDV/DV)
connector while displaying thumbnails, while
playback is stopped, or while recording an
external signal, the audio input level is displayed.
In this case, the leftmost channels that are
displayed are CH-1 and CH-2, regardless of the
setting of "Output CH" in "Audio Output" in the
AUDIO SET menu.
Wind Filter
The "On"/"Off" setting of Wind Filter is
displayed to the right of each input source. Wind
Filter settings can be made from "Wind Filter
CH1" to "Wind Filter CH4" in "Audio Input" in
the AUDIO SET menu.

Video Status Screen

Video Format
Video Format: Video format setting
The number of vertical lines, frame rate, scan
format (i/P), and file system (UDF/FAT) of the
video format set in "Format" in "System" in the
OTHERS menu are displayed.
Rec Mode: Recording bit rate (HD Mode only)
The recording bit rate of the video format set in
"Format" in "System" in the OTHERS menu is
displayed.
SDI Output: Output for SDI
The "SDI" setting in "SDI/HDMI/i.LINK I/O
Select" in the VIDEO SET menu is displayed.
HDMI Output: Output for HDMI
The "HDMI" setting in "SDI/HDMI/i.LINK I/O
Select" in the VIDEO SET menu is displayed.
i.LINK I/O: Input and output for i.LINK
The "i.LINK" setting in "SDI/HDMI/i.LINK I/O
Select" in the VIDEO SET menu is displayed.
Down Converter: SD output down-converter
setting
In HD mode, the "Down Converter" setting
(Squeeze, Letterbox, Edge Crop) in the VIDEO
SET menu is displayed.
In SD mode, "Edge Crop" is displayed when EC
(Edge Crop) in "Format" in "System" in the
OTHERS menu is selected, and "Squeeze" is
displayed when SQ (Squeeze) in "Format" in
"System" in the OTHERS menu is selected.
23.98P Output: 23.98P output mode
The "23.98P Output" setting (23.98PsF, 59.94i
(2-3 Pull Down)) in the VIDEO SET menu is
displayed.

Button/Remote Status Screen

Assign Button: Assignable button statuses
The functions assigned with the "Assign Button"
in the OTHERS menu to the respective assignable
buttons are displayed.
IR Remote: IR Remote Commander status
The "IR Remote" setting in the OTHERS menu is
displayed.
Showing the Status Screens 75