Sony PXW-X200 Operating Instructions Manual page 159

Warning indication Buzzer
on LCD/EVF
Copy Protected Input
Cannot Record
Media Error
Playback Halted
2)
Media(A) Error
Media Reached
Rewriting Limit
2)
Change Media (A)
Reached Clip Number
Limit
Copy Completed to xx/xx
Not Enough Capacity
Copy Completed to xx/xx
Reached Duplication
Limit
Copy Completed to xx/xx
Copy Error!
(CANCEL:Abort)
No Media!
Copy Error!
(CANCEL:Abort)
Media Write Protected
Copy Error!
(CANCEL:Abort)
2)
Cannot Use Media(A)
Copy General Files
NG: Cannot Copy
Unsupported File System
Cannot Record to SD
Card
NG: Media Write
Protected
Cannot Record to SD
Card
Reached Clip Number
Limit
Cannot Record to SD
Card
NG: Preparing
Tally Cause and measures
lamps
The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occurs, change the memory card after
copying the clips, as required.
Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.
The memory card comes to the end of its service life. Make a
backup copy and replace the card with another one as soon as
possible. Recording/playback may not be performed properly
if you continue to use the card.
For details, refer to the operating instructions of the memory
card.
The maximum number of clips for 1 memory card is reached,
so copying cannot continue. (xx/xx indicates the completed
copy operations.)
Replace the card.
There is not enough capacity for copying. (xx/xx indicates the
completed copy operations.)
Replace the card.
There are already 10 or more clips with the same name as the
clip that you want to copy, so copying cannot continue. (xx/xx
indicates the completed copy operations.)
Replace the card.
There is no memory card inserted in the slot.
Insert a card.
The memory card is write-protected.
Remove the card from the slot and remove the write-
protection.
A memory card that cannot be used with the camcorder is
inserted.
Replace the card in the respective slot.
Copying of a general file failed.
Retry copying.
A memory card with an different file system is inserted.
Replace the card, format it with the camcorder, or change the
"F.Sys." setting.
The SD card is write-protected.
Remove the card from the slot and remove the write-
protection.
The maximum number of clips for 1 SD card is reached, so
copying cannot continue.
Replace the card.
The proxy recording function is being prepared. Wait a while.
Error/Warning Indications 159