Sharp MZ-80B Owner's Manual page 45

12
FIGURE 2.5 shows that the loaded BASIC interpreter SB-5510 has been started.
FIGURE 2.5 Message indicating that BASIC interpreter SB-5510 has been started
Subsequently, the cassette tape is automatically rewound.
2.1.2 Activating system software stored in a diskette file
Energize the floppy disk unit and place the master diskette in drive No. 1; energize the MZ-80B.
The MZ-80B loads the system software automatically.
After a few seconds, a message should appear indicating that DISK BASIC interpreter SB-651 0
has been activated.
A special method of loading system programs from a ROM card connected to the expansion 1/0 port is possible . The
IPL of the MZ-80B enables system program loading in this manner; when the IPL is started with the "/" (slash) key
depressed, it loads the program from the memory connected to the expansion 1/0 port.