Remote Menu - Sony LMD-1951MD Instructions For Use & Warranty

COMPUTER DETECT
USER CONFIG COMPUTER DETECT
DV I :
H D 1 5 :
Submenu Setting
COMPUTER The appropriate preset memory is set for
DETECT the signal from DVI and HD15 input
connector. Select "PRESET1" for the
standard computer signal. Select
"PRESET2" to "PRESET9" when the
computer signal is not standard (on
page 84).
The preset memory is set for each input
connector of DVI and HD15.
Note
"PRESET7" to "PRESET9" will only be
displayed when "DVI" is selected.
OPTION DVI SETTING
* This settings are displayed only when a BKM-256DD is installed.
USER CONFIG – OPTION DVI SETTING
OPTION DVI SETTING
E X T 5 V ( DV I - I N ) :
E X T 5 V ( DV I - O U T ) :
E D I D U P D AT E :
E D I D S TAT U S :
M O D E L
S E R .
Submenu
EXT 5V(DVI-IN)
EXT 5V(DVI-OUT)
EDID UPDATE
78
Adjustment Using the Menus
xxxxx
xxxxx
xx
xx
xxxxx
xxxx
Setting
Selects ON to output external 5 V
power from the DVI input
connectors and OFF not to output.
Selects ON to output external 5 V
power from the DVI output
connectors and OFF not to output.
Downloads the EDID information
from the main unit (the monitor) to
the BKM-256DD. Select "START,"
and then press the ENTER button to
start downloading the EDID
information automatically. During
download, "EDID UPDATING..."
is displayed and the CONTROL
button cannot be operated. When
download finishes correctly,
"COMPLETE!" is displayed. When
a fault occurs, "ERROR" is
displayed. Press the RETURN
button to display the on-screen
menu.
Submenu Setting
EDID STATUS The information downloaded to the
BKM-256DD from the EDID of the
main unit (the monitor) is
displayed.
• MODEL: Model name of the
• SER.: Serial number of the

REMOTE menu

REMOTE
PA R A L L E L R E M O T E :
S E R I A L R E M O T E :
M O N I T O R :
C O N N E C T I O N :
Submenu Setting
PARALLEL REMOTE Selects the PARALLEL REMOTE
connector pins for which you want
to change the function.
You can assign various functions to
pins 1 to 4 and pins 6 to 8. The
following lists the functions you
can assign to the pins.
• – – – ("– – –": No function is
assigned.)
• COMPOSITE
• Y/C
• RGB
• COMPONENT
• DVI
• HD15
• OPTION A-1
• OPTION A-2
• OPTION B-1
• OPTION B-2
• UNDERSCAN
• OVERSCAN
• FULL
• NORMAL
• ZOOM
• NATIVE
• 4:3
• 16:9
• TALLY G
• EXT SYNC
• AUTO SYNC DETECT
• BLUE ONLY
• MONO
• MIRROR IMAGE
Note
If you use the PARALLEL
REMOTE function, you need to
connect cables. For more details,
see page 83.
monitor
monitor
xxxxxxx
xxx