Input Select Buttons; Function Buttons - Sony LMD-1951MD Instructions For Use & Warranty

Also, when the fan stops, this button blinks.
To display the names of functions assigned to the

function buttons

When the menu is not displayed and the button is
pressed, the function selected in FUNCTION
BUTTON SETTING of the USER CONFIG menu
is displayed on the side of the F1 to F4 button.
j Input select buttons
Press the button to monitor the signal input to each
connector.
A-1, A-2, B-1 and B-2 buttons are used when an
optional input adaptor has been installed in the option
port.
COMPOSITE button: to monitor the signal through
the COMPOSITE IN connector
Y/C button: to monitor the signal through the Y/C IN
connector
RGB button: to monitor the RGB signal through the
connectors for the R/G/B signal input
COMPONENT button: to monitor the component
signal through the connectors for Y/P
A-1 button: to monitor the signal from connector 1
of the input adaptor installed in the option port A or R/
G/B signal from BKM-229X/BKM-256DD installed
in the option port A
A-2 button: to monitor the signal from connector 2
of the input adaptor installed in the option port A or Y/
P /P signal from BKM-229X/BKM-256DD
B R
installed in the option port A
B-1 button: to monitor the signal from connector 1
of the input adaptor installed in the option port B or R/
G/B signal from BKM-229X/BKM-256DD installed
in the option port B
B-2 button: to monitor the signal from connector 2
of the input adaptor installed in the option port B or Y/
P /P signal from BKM-229X/BKM-256DD
B R
installed in the option port B
HD15 button: to monitor the signal through the
HD15 input connector
DVI button: to monitor the signal through the DVI-D
input connector
k Function buttons
You can turn the assigned function on or off.
The factory setting is as follows;
F1 button: EXT SYNC
F2 button: SCAN
F3 button: ASPECT
F4 button: MULTI DISPLAY
You can assign the function from among SCAN,
ASPECT, EXT SYNC, BLUE ONLY, MONO, MULTI
DISPLAY, APA, I/P MODE, MIRROR IMAGE and
AUTO SYNC DETECT in FUNCTION BUTTON
SETTING of the USER CONFIG menu (see page 76).
For details of the function assigned to the function
button, see page 76.
l USER MEM (user memory) button
Press to load the picture settings saved in the USER
MEMORY menu (on page 79).
/P signal input
B R
Location and Function of Parts and Controls
59