Scan Mode Image - Sony LMD-1951MD Instructions For Use & Warranty

COMPONENT t OPTION A-1 t OPTION A-2 t
OPTION B-1 t OPTION B-2 t VIDEO WAVE with
every press of the button (see "SUB INPUT SELECT"
on page 76).
POSITION
Press the button to set the sub display position. The
mode switches in the sequence 1 (Bottom left) t 2
(Bottom right) t 3 (Top right) t 4 (Top left) with
every press of the button (see "POSITION" on page 76).
SUB PICTURE SIZE
Press the button to set the size of the sub display. The
mode switches in the sequence 1 (Small) t 2 (Large)
with every press of the button (see "SUB PICTURE
SIZE" on page 76).
I/P MODE
Press the assigned button to set the delay by the picture
processing to the minimum level when interlace signal is
input. The mode switches in the sequence INTER-
FIELD t FIELD MERGE t LINE DOUBLER with
every press of the button (see "I/P MODE" on page 75).
MIRROR IMAGE
Press the assigned button to flip and display the video
signal horizontally. This function is not available for the
PRESET 1 signal and the multi display.
MONO
Press the assigned button to display a monochrome
picture. When the buttons is pressed again, the monitor
switches automatically to color mode.
APA (Auto Pixel Alignment)
Press to adjust the picture automatically to maximum
clarity for the signal input to the HD15 input connector.
For finer according to the input signal, see "DOT
PHASE" on page 74.
When the menu screen or the multi display is displayed,
APA does not function.
Note
If the APA operation does not finish correctly depending
on the input signal, adjust DOT PHASE (page 74).
BLUE ONLY
Press the assigned button to eliminate the red and green
signals. Only blue signal is displayed as an apparent
monochrome picture on the screen. This facilitates
"chroma" and "phase" adjustments and observation of
signal noise.

Scan mode image

4
NORMAL/
4
OVER
*2
SCAN
UNDER
4
SCAN
FULL
4
ZOOM
–
NATIVE
(1080i,
*3
1080p )
–
NATIVE
(720p)
–
*1 The image illustrated shows the input signal by
broken line and the efficient picture size by the solid
line.
*2 NORMAL: 7% over scan
OVER: 20% over scan
*3 1080p is effective only when BKM-250TGM is
installed.
Input
1 6
1 6
1 6
1 6
1 6
1 2 ( 4 )
1 6
1 2 ( 5 )
1 6
77
Adjustment Using the Menus