Rear Panel; Rear Cover - Sony LMD-1951MD Instructions For Use & Warranty

*10 The signal cannot operate with PRESET 7 to 9 (see
page 84).
*11 The signal can only operate with PRESET 1 (see page 84).
*12 The signal can only operate with PRESET 6 (see page 84).

Rear Panel

qa
a Rear cover
Before you connect cables to the terminals, remove the

rear cover.

For how to remove the rear cover, see page 63.
b
/I (Equipotential/Function Earth) terminal
(equipotential) terminal
Connects the equipotential plug.
I (function earth) terminal
Connects the earth cable.
c COMPOSITE IN connector (BNC)
Input connector for composite signals.
d Y/C IN connector (4-pin mini-DIN)
Input connector for Y/C signals.
e G/Y IN connector (BNC)
Input connector for G of RGB signals and component Y
(luminance) signals.
1
2 3 4 5 6 7 8
qs qd
*13 When a BKM-256DD is installed, the number of the
input connector is increased.
*14 When a BKM-250TGM is installed, the signal can be
input.
9 0
qf qg qh qj
f B/P
IN connector (BNC)
B
Input connector for B of RGB signals and P
difference) of component signals.
g R/P
IN connector (BNC)
R
Input connector for R of RGB signals and P
difference) of component signals.
h EXT SYNC IN (external sync input) connector
(BNC)
When this unit operates on an external sync signal,
connect the reference signal from a sync generator to
this connector.
To use the external sync signal, press the function button
that EXT SYNC is assigned (F1 button at the factory
setting).
Location and Function of Parts and Controls
qk
(blue color
B
(red color
R
61