Configuration Guide; Configuration Via Keypad; Table 6: Configuration Menu - Grandstream Networks GXP2130 Administration Manual

The GXP2130/GXP2140/GXP2160 can be configured via two ways:

LCD Configuration Menu using the phone's keypad;

Web GUI embedded on the phone using PC's web browser.

CONFIGURATION VIA KEYPAD

To configure the LCD menu using phone's keypad, follow the instructions below:

Enter MENU options. When the phone is in idle, press the round MENU button to enter the
configuration menu;

Navigate in the menu options. Press the arrow keys up/down/left/right to navigate in the menu
options;

Enter/Confirm selection. Press the round MENU button or "Select" soft key to enter the selected
option;

Exit. Press "Exit" soft key to exit to the previous menu;

Return to Home page.
In the Main menu, press Home soft key to return home screen;
In sub menu, press and hold "Exit" soft key until the Exit soft key changes to Home soft key, then
release the soft key.

The phone automatically exits MENU mode with an incoming call, when the phone is off hook or the
MENU mode if left idle for more than 60 seconds.

When the phone is in idle, pressing the UP navigation key can see phone's IP address.
The MENU options are listed in the following table.
Call History
Status
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18

CONFIGURATION GUIDE

Table 6: CONFIGURATION MENU

Displays Local call logs:
All Calls/Answered Calls/Dialed Calls/Missed Calls/Transferred Calls
Displays account status, network status, software version number and Hardware

Account status.

Network status.
Press to enter the sub menu for MAC address, IP setting information
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 19 of 87