Sending Originals Using The Exposure Glass - Ricoh SP 3600SF User Manual

Sending Originals Using the Exposure Glass

1. Press [Facsimile]
2. Make sure "Ready" appears on the screen
3. Place the first page of the original face down on the exposure glass
For details about the originals you can set, see "Placing Originals on the Exposure Glass", Paper
Specifications and Adding Paper
For details about how to place originals to send using the facsimile function, see "Placing Originals
to Send", Fax .
4. Configure scan settings
For details, see "Specifying Scan Settings", Fax
5. Specify a destination
If you make a mistake, press the [Clear/Stop] key, and then enter again.
For details about specifying a destination, see "Specifying a Destination", Fax
6. When sending the same original to several destinations (broadcasting), specify the next
destination
If you want to specify another destination manually right after specifying a destination manually,
press [Add Dest].
7. Press [Start]
8. Place the next original on the exposure glass within 60 seconds when you send multiple
originals Press [Start]
Basic Procedure for Transmissions (Memory Transmission)
DBH012
.
.
.
51