Ricoh SP 3600SF User Manual page 88

Table of Contents

8. Adding Paper and Toner

Specifying thick paper or OHP transparencies for paper type using the control panel

• Usually only one side of OHP transparencies can be used for printing. Be sure to load them with the

print side up.

• When printing onto OHP transparencies, remove printed sheets one by one.

Press the [User Tools] key, and then select the setting items using the [ ] or [ ] key.

Select [Tray Paper Settings]

Select [Paper Type: Bypass Tray]

Select the type of the paper set in bypass tray

If you have selected [Recycled Paper], [Color Paper], [Letterhead], [Label Paper],

[Envelope], or [Preprinted Paper] for the paper type, press [Escape]

Select [Maintenance]

Select the paper thickness setting for the specified paper type

Select the tray where the specified type of paper is loaded

Select the paper thickness

• For details about paper thickness, see "System Settings", Connecting the Machine/ System Settings

Press OK

Press [OK]

DBH015

Press [OK]

Table of Contents

Show Quick Links

Table of Contents

Sp 3610sf