Table of Contents
Advertisement
Sending Originals Using the Exposure Glass (Memory Transmission)
1.
Make sure [Immed. TX] is not highlighted.
2.
Place the first page of the original face down on the exposure glass.
3.
Specify a destination.
4.
Make the scan settings you require.
5.
Press [Start].
6.
Place the next original on the exposure glass within 60 seconds when you send multiple
originals, and then repeat Steps 4 and 5.
Repeat this step for each page.
7.
Press [ ].
The machine dials the destination and starts transmission.
Registering a Fax Destination
1.
Press [Home] (
) at the bottom of the screen in the center.
2.
Flick the screen to the left, and then press the [Address Book Management] icon on Home
screen 4.
3.
Check that [Program / Change] is selected.
Basic Procedure for Transmissions (Memory Transmission)
83
Advertisement
Table of Contents
