Vlan Port Ingressfilter All; Vlan Port Pvid All; Vlan Port Tagging All - Planet Networking & Communication WGS3-24000 User Manual

▫
Format vlan port acceptframe all {vlanonly | all}
▫
Mode Global Config
8.6.71.1 no vlan port acceptframe all
This command sets the frame acceptance mode for all interfaces to Admit All. For Admit All mode, untagged frames or priority
frames received on this interface are accepted and assigned the value of the interface VLAN ID for this port. With either option,
VLAN tagged frames are forwarded in accordance with the IEEE 802.1Q VLAN Specification.
▫
Format no vlan port acceptframe all {vlanonly | all}
▫
Mode Global Config

8.6.72 vlan port ingressfilter all

This command enables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do not
match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
▫
Default Disabled
▫
Format vlan port ingressfilter all
▫
Mode Global Config
8.6.72.1 no vlan port ingressfilter all
This command disables ingress filtering for all ports. If ingress filtering is disabled, frames received with VLAN IDs that do not
match the VLAN membership of the receiving interface are admitted and forwarded to ports that are members of that VLAN.
▫
Format no vlan port ingressfilter all
▫
Mode Global Config

8.6.73 vlan port pvid all

This command changes the VLAN ID for all interfaces.
▫
Default 1
▫
Format vlan port pvid all <1-4094>
▫
Mode Global Config
8.6.73.1 no vlan port pvid all
This command sets the VLAN ID for all interfaces to 1.
▫
Format no vlan port pvid all <1-4094>
▫
Mode Global Config

8.6.74 vlan port tagging all

This command configures the tagging behavior for all interfaces in a VLAN to enabled. If tagging is enabled, traffic is transmitted
as tagged frames. If tagging is disabled, traffic is transmitted as untagged frames. The ID is a valid VLAN identification number.
▫
Format vlan port tagging all <1-4094>
▫
Mode Global Config
370