Show Dot1X Users; Show Radius - Planet Networking & Communication WGS3-24000 User Manual

are True or False.
▫ Control Direction - Indicates the control direction for the specified port or ports. Possible values are both or in.
If the optional parameter 'statistics <slot/port>' is used, the dot1x statistics for the specified port are displayed.
▫ Port - The interface whose statistics are displayed.
▫ EAPOL Frames Received - The number of valid EAPOL frames of any type that have been received by this
authenticator.
▫ EAPOL Frames Transmitted - The number of EAPOL frames of any type that have been transmitted by this
authenticator.
▫ EAPOL Start Frames Received - The number of EAPOL start frames that have been received by this authenticator.
▫ EAPOL Logoff Frames Received - The number of EAPOL logoff frames that have been received by this authenticator.
▫ Last EAPOL Frame Version - The protocol version number carried in the most recently received EAPOL frame.
▫ Last EAPOL Frame Source - The source MAC address carried in the most recently received EAPOL frame.
▫ EAP Response/Id Frames Received - The number of EAP response/identity frames that have been received by this
authenticator.
▫ EAP Response Frames Received - The number of valid EAP response frames (other than resp/id frames) that have
been received by this authenticator.
▫ EAP Request/Id Frames Transmitted - The number of EAP request/identity frames that have been transmitted by this
authenticator.
▫ EAP Request Frames Transmitted - The number of EAP request frames (other than request/identity frames) that have
been transmitted by this authenticator.
▫ Invalid EAPOL Frames Received - The number of EAPOL frames that have been received by this authenticator in which
the frame type is not recognized.
▫ EAP Length Error Frames Received - The number of EAPOL frames that have been received by this authenticator in
which the frame type is not recognized.

10.1.26 show dot1x users

This command displays 802.1x port security user information for locally configured users.
▫
Format show dot1x users <slot/port>
▫
Mode Privileged EXEC
▫ User - Users configured locally to have access to the specified port.

10.1.27 show radius

This command is used to display the various RADIUS configuration items for the switch as well as the configured RADIUS
servers. If the optional token 'servers' is not included, the following RADIUS configuration items will be displayed.
▫
Format show radius [servers]
▫
Mode Privileged EXEC
▫ Primary Server IP Address - Indicates the configured server currently in use for authentication
▫ Number of configured servers - The configured IP address of the authentication server
▫ Max number of retransmits - The configured value of the maximum number of times a request packet is retransmitted
▫ Timeout Duration - The configured timeout value, in seconds, for request re-transmissions
411