Heat & Glo VRT-BZ-N-AUB Owner's Manual page 61

Display Screen
FIREPLACE STATUS
THERMOSTAT
FLAME HEIGHT
FAN SPEED
ADJUSTABLE
AUXILIARY
ADJUSTABLE
OUTPUT (ON/OFF)
TIMER DISPLAY/FUNCTION
Figure 12.11 RC300CE Display Screen
Function Buttons
Use POWER button to turn the unit on and off.
Menu
Use MENU button to display the menu functions.
Menu
Only functions that can be activated will be
V
Select
V
displayed. For example: Flame Height will not be
Select
displayed when the remote status is OFF.
Menu
Use the SELECT button to select the current
V
Select
feature.
Use the UP and DOWN arrows to toggle through
the menu functions and value selections in the
V
V
submenus.
61
THERMOSTAT DESIRED
TEMP SETTING
CHILD LOCK
INDICATOR
TRANSMISSION
INDICATOR
LOW BATTERY
INDICATOR
FUNCTION LEVEL
INDICATOR
ROOM TEMP
DISPLAY
Heat & Glo • VRT-AUB • 2123-980_R14 • 12/14
Idle When Remote is in ON Mode
The remote control will go into an idle mode if no buttons
are pressed within 5 seconds. Press any button to resume
full functionality. In idle mode only active functions will show
on the screen.
Standby mode
The remote control will go into a standby mode if no buttons
are pressed within 5 minutes. Press the POWER button to
reactivate the remote control to ON mode. Active functions
will be displayed.