Initial Setting - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 75 Monday, August 21, 2006 5:05 PM

Initial Setting

1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Initial Setting" using
[Cursor
/
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3
Select "Video Out" using
[Cursor
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
Video Out (Default: SCART(RGB))
Set the video output signal to be fixed accordingly to
your TV set.
4
Select the desired setting using
[Cursor
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
The selected setting will be checked and
activated.
], then press [ENTER].
10/04/06(Mon) 19:34
], then press [ENTER].
10/04/06(Mon) 19:34
], then press [ENTER].
10/04/06(Mon) 19:34
RGB RGB
Component(Progressive) Component(Progressive)
Component(Interlace) Component(Interlace)
SCART(RGB):
Select "SCART(RGB)" if your TV has a scart
terminal and connected to it.
Component (Progressive):
If your TV is compatible with progressive
scanning, select "Component (Progressive)" and
make sure the connection indicated by each jack
(Y / P / P ) properly.
B R
Component (Interlace):
If your TV has component jacks, select
"Component (Interlace)" and make sure the
connection indicated by each jack (Y / C
properly.
5
When you finish with the setting,
press [SETUP] to exit.
75
/ C )
B R
EN