Display - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 82 Monday, August 21, 2006 5:05 PM

Display

1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Display" using
[Cursor
/
Setup Menu
Disc Management Disc Management
Editing Editing
Dubbing Dubbing
Timer Programme Timer Programme
Title List Title List
Initial Setting Initial Setting
Digital Audio Setting Digital Audio Setting
Playback Playback
Recording Recording
Display
3
Select a desired item using
[Cursor
/
Display
FL Dimmer
Display Device Status
Background Colour
Screen Saver
4
Refer to 1. to 4. on this page and set
the selected item.
5
When you finish with the setting,
press [SETUP] to exit.
1. FL Dimmer (Default: Auto)
Set the front panel display brightness.
You can choose one from "Auto," "Bright" and "Dark".
If "Auto" is selected, the display gets dark when the
power is off.
(Follow steps 1 to 2 above.)
Select "FL Dimmer" using
[Cursor
/
Option window will appear.
Select the desired setting using
[Cursor
/
Auto
Bright
Dark
The selected setting will be checked and
activated.
EN
], then press [ENTER].
10/04/06(Mon) 19:34
], then press [ENTER].
10/04/06(Mon) 19:34
], then press [ENTER].
], then press [ENTER].
2. Display Device Status (Default: On)
Set the operating display.
(Follow steps 1 to 2 on the left.)
Select "Display Device Status" using
[Cursor ], then press [ENTER].
/
Option window will appear.
Select the desired setting using
[Cursor ], then press [ENTER].
/
On
Off
The selected setting will be checked and
activated.
On: Shows the operating display.
Off: Does not show the operating display.
3. Background Colour (Default: On)
Set the background colour.
When there is no signal for the picture signal input,
the screen changes to blue background.
(Follow steps 1 to 2 on the left.)
Select "Background Colour" using
[Cursor ], then press [ENTER].
/
Option window will appear.
Select the desired setting using
[Cursor ], then press [ENTER].
/
On
Off
The selected setting will be checked and
activated.
4. Screen Saver (Default: On)
You can set to "On" to activate the Screen Saver after
10 minutes of no activity.
(Follow steps 1 to 2 on the left.)
Select "Screen Saver" using
[Cursor ], then press [ENTER].
/
Option window will appear.
Select the desired setting using
[Cursor ], then press [ENTER].
/
On
Off
The selected setting will be checked and
activated.
82