Setting For External Connection (Av3) - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 40 Monday, August 21, 2006 5:05 PM
11
Select "Yes" using [Cursor
then press [ENTER].
HDD ➔ DVD Dubbing
Please Select Rec Mode
Fast XP SP
Yes
Title amount
Space available
Dubbing will start.
Please wait for a moment.
HDD DVD 10%
• It may take awhile to prepare for the dubbing.
• During Fast Dubbing, the playback picture will
not appear.
• When dubbing is completed, completion
message will be displayed on the screen for a
few seconds.
To stop the dubbing in progress:
1 Press [DUBBING] for 8 seconds. Confirmation
Window will appear.
2 Select "Yes" using [Cursor
[ENTER].
3 Press [ENTER] to exit.
EN
],
/
15/07/06(Sat) 19:53
Start dubbing. Start dubbing.
OK to proceed? OK to proceed? LP EP SLP Auto
No
1350MB
4335MB
Preparing to dub.
/
], then press
Setting for external connection
(AV3)
Connect the external equipment using either the input
jacks, AV1(TV) (Rear), AV2(DECODER) (Rear) or
AV3 (Front). However, for AV3 jacks, you have to
select S-VIDEO input or VIDEO input jacks
depending on the connected devices.
Use a commercially available Scart, S-Video or Video
cable and an Audio cable for this connection.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Initial Setting" using
[Cursor ], then press [ENTER].
/
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3
Select "Select Video" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
4
Select the video input type you use,
"Video In" or "S-Video In", using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
The selected setting will be checked and
activated.
• The default setting is "Video In".
5
Press [SETUP] to exit.
40
10/04/06(Mon) 19:34
10/04/06(Mon) 19:34
10/04/06(Mon) 19:34
Video In Video In
S-Video In S-Video In