Basic Recording; One-Touch Timer Recording (Otr) - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 32 Monday, August 21, 2006 5:05 PM

Basic Recording

VR
HDD HDD DVD-RW DVD-RW
Follow the steps below to record a TV programme.
• Use only the HDD or CPRM-compatible VR mode
DVD-RW discs for recording copy-once
programmes. (See page 27.)
If you are recording to the HDD, press [HDD] first.
If you are recording to a disc, press [DVD] first.
Insert a recordable disc if you are recording to a
DVD.
1
Turn on the TV. Select the
appropriate external input channel.
(See pages 15 to 16.)
2
Select a Rec Mode using
[REC MODE].
3
Select the desired channel to record
using [PROG.
[the Number buttons].
4
Press [REC] to start recording.
The information will be displayed for 5 seconds.
To pause the recording, press [PAUSE p].
Press [REC] or [PAUSE p] to resume the
recording.
5
Press [STOP S] to stop the
recording.
Note
• If playback and recording are in progress at the
same time, select the appropriate device by
pressing [HDD] or [DVD] before you press
[PAUSE p] or [STOP S] to pause or stop the
operation.
• When the Clock Setting has not been made, the
date and time of title names in the Original or
Playlist will be 01/01/06 (Sun) and 0:00.
• Up to 600 titles can be recorded on the HDD.
• Up to 99 titles can be recorded on the DVD-RW / R
discs.
• You cannot change the recording mode during HDD/
DVD recording.
• If you want to monitor the programme that you are
recording, make sure the device such as a Satellite
Box is turned off when it is connected to AV2.
• NTSC recording is prohibited in this unit.
EN
Video
DVD-RW DVD-RW DVD-R DVD-R
(See page 26.)
/ ] or
One-touch Timer Recording
(OTR)
VR
HDD HDD
DVD-RW DVD-RW DVD-RW DVD-RW
This is a simple way to start a timer recording. You
can start recording right away by just one touch of a
button and each press of the button sets the end time
for the recording. The recording time will increase by
15 minute to the max of 4 hours.
If you are recording to the HDD, press [HDD] first.
If you are recording to a disc, press [DVD] first.
1
Whenever you want to start
recording the programme you are
watching, press [REC].
The recording will start.
2
Press [REC] repeatedly to set the
end time for the recording. Each
press of the button will increase the
recording time by 15 minutes (the
maximum recording time is 4 hours).
0:15
(Normal Recording)
4:00
• The maximum recording time is 4 hours.
• To change the recording time during
the One-touch Timer Recording, press [REC]
repeatedly.
3
When the recording is completed,
the unit will ask you whether to turn
off the unit except conditions listed
below.
- If a Timer Recording is programmed to start in 5
minutes.
- During playback of HDD / DVD.
- While displaying menus or information on the
screen.
• The unit will be turned off automatically if you
select "Yes" or if you do not reply in 1 minute.
• To cancel the OTR in progress, press
[STOP S].
Note
• The remaining recording time will be displayed on
the Front Panel Display during a One-touch Timer
Recording.
• The unit will turn off automatically when a power
failure occurs.
32
Video
DVD-R DVD-R
0:30
3:45