Initial Setups; For The First Time Use; Channel Setting - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 18 Monday, August 21, 2006 5:05 PM

Initial Setups

For the first time use

Right after the purchase of the unit, do the Initialise
Setting by doing the following procedures.
This menu may not appear if you have already turned
on the unit.
1
After making all the necessary
connections, turn on the TV. Select
the appropriate external input
channel.
(See pages 15 to 16.)
2
Press [STANDBY-ON].
3
Press [ENTER] to start Auto Channel
Tuning.
Auto Tuning
Auto Tuning Now Auto Tuning Now
If you like to skip this step, press [RETURN].
4
Use [Cursor
current time then press [ENTER].
Initial Setting
01 / 01 / 2006 (Sun) -- : --
EN
--/--/--(---) --:--
OK
] to set
/ / /
--/--/--(---) --:--
Clock Setting

Channel Setting

Auto Tuning
If you have already set the channels when you first
turned on the unit, you can skip this section.
After resetting the settings or whenever you move to a
new area, we recommend you to programme available
channels in your area with the following procedures.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Initial Setting" using
[Cursor ], then press [ENTER].
/
Setup Menu
Disc Management
Editing
Dubbing
Timer Programme
Title List
Initial Setting
Digital Audio Setting
Playback
Recording
Display
3
Select "Channel Setting" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Channel Setting
TV Aspect
Select Video
Video Out
4
Select "Auto Tuning" using
[Cursor ], then press [ENTER].
/
Initial Setting
Clock Setting
Channel Setting
Auto Tuning
TV Aspect
Manual Tuning Manual Tuning
Select Video
Move Move
Video Out
The unit will start storing channels available in
your area.
18
10/04/06(Mon) 19:34
10/04/06(Mon) 19:34
10/04/06(Mon) 19:34