Others; Troubleshooting - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 83 Monday, August 21, 2006 5:05 PM

Others

Troubleshooting

Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing.
Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper performance.
Error message
Operation could not be completed
successfully.
There may be a problem with the disc.
There is no title in the original list.
There is no playlist.
There are no editable playlists.
No more titles can be added.
The number of titles exceeds the limit.
Cannot perform the dubbing.
The title is copy-protected.
Cannot perform the dubbing.
Cannot perform the dubbing.
Insufficient disc space.
Cannot perform the dubbing.
Use a CPRM compatible disc.
Could not perform the dubbing.
The operation is currently unavailable.
All or part of the programme will not be
recorded.
Incorrect password.
Cannot read disc.
Either the disc is unsupported, or it is
scratched or dirty.
Region Code Error.
Cannot play disc.
Number of recordable titles exceeded.
Total number of chapters exceeds the
limit.
Recording is stopped.
There are some problems with the
disc.
HDD Error.
DVD Error.
Possible cause
• The disc may be dirty or have
scratches.
• Nothing has been recorded yet.
• There is no title in the Original.
• Playlist has not been created yet.
• There is only one title in the Playlist. It
requires more than two titles to perform
this editing feature.
• You only can register up to 18 titles in
the Dubbing Title List.
• Undubbable disc, such as DVD-Video
disc, may be inserted.
• The disc may be unrecordable, or there
is no disc in the unit.
• The space in the recording media is not
enough for the dubbing.
• You are trying to dub a copy-once
programme to a non-CPRM compatible
disc. Copy-once programmes can only
be dubbed to a CPRM compatible disc.
• There may be insufficient space in the
HDD because the Fast Dubbing from
DVD to HDD and the HDD recording
are proceeding simultaneously.
• You are not allowed to edit a Timer
Programme during or 10 seconds
before the Timer Recording of the
selected Timer Programme.
• Timer Programmes may be
overlapping.
• Incorrect password was entered.
• The disc may not be supported by this
unit, or it may be dirty or have
scratches.
• The disc's region code is not supported
by this unit.
• You are trying to record when total title
number is already at the limit.
• You are trying to record when total
chapter number is already at the limit.
• The disc may be dirty or have
scratches.
83
Solution
• Check and clean the disc if necessary.
(See page 4.)
• Record some programmes. (See page
32.)
• Create a Playlist first. (See page 63.)
• Create more than two titles in the
Playlist. (See page 63.)
• Delete unnecessary titles from the
Dubbing Title List. (See page 39.)
• Insert a dubbable disc. (See page 37.)
• Insert a dubbable disc. (See page 37.)
• Make sufficient space in the recording
media.
• Use a CPRM compatible disc.
• Check the dubbing title or the recording
media.
• Stop the recording if you want to edit
the Timer Programme in recording.
(See pages 32 and 33.)
• Check the Timer Programmes.
• Enter correct password. If you have
forgotten the password, press and hold
[CLEAR] for 8 seconds.
• Use only the discs supported by this
unit (see page 44), or clean the disc if
necessary (see page 4).
• Use only the discs with the region code
supported by this unit. (See page 44.)
• Delete unnecessary titles. (See page
65.)
• Delete unnecessary chapters. (See
page 62.)
• Check and clean the disc if necessary.
(See page 4.)
• Turn the power off, then on again. If the
problem cannot be solved yet, please
call an Authorized Service Centre.
• Turn the power off, then on again. If the
problem cannot be solved yet, please
call an Authorized Service Centre.
EN