Rear Panel - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 9 Monday, August 21, 2006 5:05 PM

Rear Panel

9
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
IN IN
COAXIAL
OPTICAL
L
R
OUT AV2 ( DECODER )
AV2 ( DECODER )
ANALOG
ANTENNA AUDIO OUT
1 2 3 4
1 ANTENNA IN
:
Connect to an antenna cable.
2 ANTENNA OUT
:
Connect to the Aerial jack on your TV, cable box
or direct broadcast system.
Use the supplied RF cable.
3 ANALOG AUDIO OUT jacks
Connect to the audio input jacks on your TV. Use
a commercially available Audio cable.
4 AV2(DECODER)
Connect to VCR, camcorder, or other
Audio-Video equipment. Use a commercially
available Scart cable.
5 AV1(TV)
:
Connect to the Scart jack on your TV. Use a
commercially available Scart cable.
Note
• Do not touch the inner pins of the jacks on the rear panel.
Electrostatic discharge may cause permanent damage to the unit.
• This unit does not have an RF modulator.
8 7
COMPONENT
VIDEO OUTPUT
S-VIDEO
OUT
Y Y P P /C /C P P /C /C
B B B B R R R R
AV1 ( TV ) AV1 ( TV )
5
:
:
6 Mains cable
:
Connect to a standard AC outlet.
7 S-VIDEO OUT jack
:
Connect to the S-Video input jack on your TV.
Use a commercially available S-Video cable.
8 COMPONENT VIDEO OUTPUT jacks
Connect to an optional component video cable
through the component video input jacks of a TV.
9 DIGITAL AUDIO OUTPUT (OPTICAL /
COAXIAL) jacks
:
Connect to an amplifier with a digital input jack
such as a Dolby Digital decoder, DTS decoder or
MPEG decoder. Use a commercially available
Optical / Coaxial cable.
9
6
:
EN