Auto Finalise - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 42 Monday, August 21, 2006 5:05 PM
5
Select "Yes" using [Cursor
then press [ENTER].
Disc Management
DVD Format
DVD Disc Control
HDD Initialise
Finalise the disc. Finalise the disc.
Yes
• If the disc has already been finalised, "Undo
Finalise" will be listed in the menu instead of
"Finalise" (DVD-RW only). To Undo the
finalisation of the disc, select "Undo Finalise"
and press [ENTER].
Finalising will start.
• This operation may take awhile to be completed.
Note
• You cannot cancel finalising the disc once it has
started.
EN
],
/
10/04/06(Mon) 19:34
Finalise

Auto Finalise

Auto Finalise
Disc Protect Disc Protect
OK to proceed? OK to proceed?
No
Auto Finalise
VR Video
DVD-RW DVD-RW DVD-RW DVD-RW
You can finalise discs automatically when the disc
space runs out if you set this in the Setup Menu.
1
Press [SETUP] in stop mode.
Setup Menu will appear.
2
Select "Disc Management" using
[Cursor ], then press [ENTER].
/
Setup Menu
Disc Management
Editing Editing
Dubbing Dubbing
Timer Programme Timer Programme
Title List Title List
Initial Setting Initial Setting
Digital Audio Setting Digital Audio Setting
Playback Playback
Recording Recording
Display Display
3
Select "DVD Disc Control" using
[Cursor ], then press [ENTER].
/
4
Select "Auto Finalise" using
[Cursor ], then press [ENTER].
/
Disc Management
DVD Format
Finalise
DVD Disc Control
Auto Finalise
HDD Initialise
Disc Protect
5
Select "On" using [Cursor
then press [ENTER].
Disc Management
DVD Format
Finalise
DVD Disc Control
Auto Finalise
HDD Initialise
Disc Protect
Auto Finalise Auto Finalise
On
Off
The unit automatically finalises the disc when the
disc space runs out.
Your setting is activated.
• The default setting is "Off"
6
Press [SETUP] to exit.
Note
• Auto Finalise is not available while the Setup Menu
is displayed.
42
DVD-R DVD-R
10/04/06(Mon) 19:34
10/04/06(Mon) 19:34
],
/
10/04/06(Mon) 19:34