Connecting To External Equipment; Digital Audio For Better Sound Quality - FUNAI HD-B2735 Owner's Manual

E2B21BD_E2B28BD_EN.book Page 16 Monday, August 21, 2006 5:05 PM
3
Connect the ANALOG AUDIO OUT
jacks of this unit to the analogue
Audio input jacks of your TV. Use a
commercially available Audio cable.
AUDIO Component
IN Video IN
Y
Audio cable
(not
supplied)
DIGITAL AUDIO OUTPUT COMPONENT
PCM/BITSTREAM VIDEO OUTPUT
IN IN
COAXIAL
Y Y
OPTICAL
L
R
OUT AV2 ( DECODER )
AV2 ( DECODER )
ANALOG
ANTENNA AUDIO OUT
Note for a TV with no S-Video input jack or Scart
jack:
• This unit has no RF modulator, so this type of TV
cannot be used.
• Only component connection is compatible with the
Progressive Scan.

Connecting to external equipment

This unit has three input terminals, AV1(TV) or
AV2(DECODER) on the rear panel and AV3 on the
front panel. Be sure that all the units are off before
making any connections.
Recording from a HDD / DVD player, VCR,
Satellite Box or other Audio-Video
equipment with a Scart output jack (AV2)
AV output
jack (Scart)
Scart cable (not supplied)
AV2(DECODER)
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
IN IN
L OPTICAL
R
OUT
ANALOG
AUDIO OUT
ANTENNA
Note
• When you record a TV programme from a Satellite
Box, you must connect a Scart cable to
AV2(DECODER). (See page 36.)
• If the external equipment connected to the
AV2(DECODER) jack supplies control voltage to this
unit via Pin 8 of the Scart cable, the display
functions (e.g.P01) of the remote control cannot be
seen on the TV. In this case, turn off the external
equipment to prevent control voltage.
EN
S-VIDEO
IN
P B /C B P /C R
Component
Video cable
(not supplied)
S-Video
cable (not
supplied)
S-VIDEO
OUT
P P /C /C P P /C /C
B B B B R R R R
AV1 ( TV ) AV1 ( TV )
COMPONENT
VIDEO OUTPUT
S-VIDEO
OUT
COAXIAL
Y Y P P /C /C P P /C /C
B B B B R R R R
AV2 ( DECODER ) AV2 ( DECODER ) AV1 ( TV ) AV1 ( TV )
16
Recording from a camcorder or other
Audio-Video equipment with no Scart output
jack (AV3)
If no S-Video input jack is available, connect to
VIDEO input jack on the front panel using an RCA
Video cable.
Set "S-Video In" when using S-VIDEO input jack.
(See page 40.)
AV3 (Front)
HDD DVD
STOP PLAY REC
S-VIDEO VIDEO L
L
S-VIDEO VIDEO AUDIO
S-Video cable
(not supplied)
S-VIDEO AUDIO
IN OUT

Digital audio for better sound quality

Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
Coaxial cable
(not supplied)
DIGITAL AUDIO OUTPUT CO
PCM/BITSTREAM
VID
IN IN
COAXIAL
Y Y
OPTICAL
L
R
Optical cable
AV2 AV2
ANALOG
AUDIO OUT
A
(not supplied)
DIGITAL AUDIO OUTPUT COMPONENT
PCM/BITSTREAM VIDEO OUTPUT
IN IN
S-VIDEO
OUT
COAXIAL Y Y P P /C /C P P /C /C
B B B B R R R R
OPTICAL
L
R
OUT
AV2 ( DECODER ) AV2 ( DECODER ) AV1 ( TV ) AV1 ( TV )
ANALOG
ANTENNA AUDIO OUT
The connections illustrated above are
optional for better sound.
1
For clear digital sound quality, use
the DIGITAL AUDIO OUT (OPTICAL /
COAXIAL) jacks to connect your
digital audio equipment.
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
STAND-BY ON
AUDIO R
R
Audio cable
(not supplied)
Digital audio
input jack
COAXIAL
OPTICAL
or