Adjusting The Height Of The Headrest Or Neckrest; Adjusting The Cheek Supports - Invacare TDX SP2 series User Manual

Invacare® TDX SP2® Series
Requirements:
•
Allen key 5 mm
Loosen the screws A , B or the clamping lever C.
1.
2. Adjust the headrest or neckrest to the required position.
3. Retighten screws and clamping lever.
4. Loosen the Allen screw D.
5. Slide the headrest left or right to the required position.
6. Retighten the Allen screw.

5.7.2 Adjusting the height of the headrest or neckrest

The adjustment of the height is the same for all headrests and
neckrests.
42
1. Loosen the knob A.
2. Adjust the headrest or neckrest to the required height.
3. Retighten the knob.

5.7.3 Adjusting the cheek supports

1. Push the cheek supports inward or pull them out to the required
position.
1578997-A