3.
Set the desired angle.
4.
Turn the knob clockwise to tighten it.
5.12.3 Setting the end stop of the legrest
Requirements:
•
1 x 10 mm open-ended spanner
1578997-A
Adjusting the mobility device to the user's seating posture
1.
The end position of the legrest is determined by means of a
rubber stop (1).
2.
The rubber stop can be screwed in or out A or pushed up or
down B.
3.
Loosen the locking knob (1) counter-clockwise at least one turn.
51