Adjusting The Backrest Angle (Max Seat); Adjusting The Tension Adjustable Backrest Upholstery - Invacare TDX SP2 series User Manual

Invacare® TDX SP2® Series

5.6.4 Adjusting the backrest angle (Max seat)

Requirements:
•
Crosstip screwdriver
1. Remove the backrest cushion and the seat cushion.
2.
Loosen the screws (1) and remove the seat plate.
3.
Remove the saving and the bolt (1).
4. Flip the backrest forward.
5. Loosen the knurled nut (2).
6. With the spindle, adjust the desired angle of the backrest.
Turning the spindle clockwise and inwards inclines the backrest
backwards. Turning the spindle anti-clockwise and outwards
inclines the backrest forwards.
38
7. With the bolt, reattach the spindle to the backrest tube and
secure the bolt.
8. Mount the seat plate and replace the seat cushion.
5.6.5 Adjusting the tension adjustable backrest
upholstery
1.
Remove the backrest cushion (attached with Velcro strips) by
pulling it up and off to access the adjustment straps.
2.
Adjust the tension of the individual straps as desired.
3. Replace the backrest cushion.
1578997-A