Invacare TDX SP2 series User Manual page 20

Invacare® TDX SP2® Series
A
B
Identification of the lashing eyes at the front and back:
C
20
If the mobility device is fitted
with a tray, it is imperative
that it is removed and safely
stowed when transporting the
mobility device in a vehicle.
This symbol indicates the
position of an anchor point
when using a lashing system
during transport.
If the symbol appears on a
bright yellow sticker, the
anchoring point is suitable for
fixation of the mobility device
in a vehicle for use as a vehicle
seat.
Warning that the mobility
device may not be used as a
vehicle seat
This mobility device does not
satisfy the requirements of
ISO 7176-19:2001.
Identification label sticker
on the chassis at the right
containing the following
symbols.
For details see below.
D
E
F
Identification of the position of the coupling lever for driving
and push operation (only the right side visible in the picture):
Warning regarding the use of
the lifter.
For details see below.
Indication of the maximum
width to which the armrest
can be set
This symbol indicates the
"Drive" position of the
coupling lever. In this position
the motor is engaged and the
motor brakes are operational.
You can drive the mobility
device.
•
Please note that for
driving purposes both
motors must always be
engaged.
1578997-A