Invacare TDX SP2 series User Manual page 21

Hide thumbs Also See for TDX SP2 series:
Table of Contents

Advertisement

G
1578997-A
This symbol indicates the
"Push" position of the
coupling lever. In this position
the motor is disengaged and
the motor brakes are not
operational. The mobility
device can be pushed by an
attendant and the wheels turn
freely.
Please note that the
control panel must be
switched off.
Please also note the
information provided
in section 6.8 Pushing
the mobility device in
freewheel mode, page
69.
This wheelchair may be used
as a vehicle seat, but only if it
is equipped with a headrest
that has been approved by
Invacare for this purpose.
Please always make sure
that the wheelchair is
equipped with a headrest
approved by Invacare
before using it as a
vehicle seat.
Explanation of symbols on labels
Date of manufacture
This product complies with Directive 93/42/EEC
concerning medical devices. The launch date of this
product is stated in the CE declaration of conformity.
This product has been supplied from an
environmentally aware manufacturer. This product
may contain substances that could be harmful to the
environment if disposed of in places (landfills) that
are not appropriate according to legislation.
The 'crossed out wheelie bin' symbol is placed
on this product to encourage you to recycle
wherever possible.
Please be environmentally responsible and
recycle this product through your recycling
facility at its end of life.
Do not lean out when the lifter is raised!
Do not drive up or down slopes when the lifter is
raised!
Safety
21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents