• Loosen and remove the backrest plate screw (A).
• Loosen the backrest plate screws (B).
Do not remove the screws!
• Move the backrest plate halves to the required width.
• Re-insert screw (A).
• Re-tighten the screws.
9.4.7
Adjusting the backrest angle (Modulite seat unit)
CAUTION Every change to the seat angle and every backrest angle change alters the
geometry of the electric wheelchair and affects its tipping stability
• For more information on tipping stability, overcoming obstacles correctly, driving along
inclines and slopes and the correct position of the backrest and seat angles, see the section
"Taking Obstacles" on page 39 and "Driving up and down gradients" on page 41.
9.4.7.1
Electric
Your remote's user manual contains information on electrical adjustment.
65