Sending Faxes - Canon MF8580Cdw User Manual

Sending Faxes

NOTE
You need to complete some procedures before using fax functions.
(MF8580Cdw / MF8550Cdn / MF8280Cw Only)
1
Place the document(s).
2
Press .
3
Enter the destination using the numeric keys, and press <Apply>.
If your machine is connected to a PBX (Private Branch Exchange), use
destination. If <R> is not available, you need to register the R-key settings.
If you enter the wrong characters, press
characters at once.)
To make it easier to specify destinations by using other methods, such as the Address Book, see
Faxes.
NOTE:
When <Confirm Entered Fax Number> is set to <On>, a screen appears that prompts you to enter the destination again
( Checking Destinations before Sending Documents). Enter the same destination again for confirmation.
To send overseas
Enter the international access code, the country code, the area code, and the fax number to specify the destination.
1
Enter the international access code.
2
Use / to select <Pause>, and press
<p> (pause) is inserted between numbers. In this case, 012 will be dialed first, then two seconds later, the
next number will be dialed.
NOTE:
Inputting pauses is optional; however, consecutive numbers that are input without pauses may not be
recognized correctly.
Pauses can be inserted continuously.
One pause inserts 4 seconds of waiting time. This time can be changed as necessary.
Placing Documents
. (Press to delete each character one by one; press and hold to delete all the input
.
Configuring Initial Settings for Fax Functions
/ to select <R> and press
R-Key Setting
0ALJ-032
before entering the
Specifying Destinations for
Set Pause Time