Waiting Time for Connection at Startup
Specify a wait time for connecting to a network. Select the setting depending on the network environment.
Connecting to a Network
0 to 300 (sec.)
Ethernet Driver Settings
Select the communication mode of Ethernet (half-duplex/full-duplex) and the Ethernet type (10BASE-T/100BASE-TX). You can also view
the MAC address of the machine.
Auto Detect
Select whether to automatically detect or manually select the communication mode and the Ethernet type.
Settings
Off
Communication Mode
Half Duplex
Full Duplex
Ethernet Type
10BASE-T
100BASE-TX
On
MAC Address
Check the MAC address of the machine, which is a number unique to each communication device.
IEEE 802.1X Settings
Enable or disable IEEE 802.1X authentication.
Off
On
<Network Settings>
machine
Initialize Network Settings
Select to return the Network Settings to the factory defaults.
Configuring IEEE 802.1X Authentication
<IEEE 802.1X Settings>
Initialize System Management Settings
Setting a Wait Time for
Configuring Ethernet
Viewing the MAC Address
Select <Off> or <On>
Restart the