Table of Contents
Advertisement
Chapter 9: Display settings
Option
2. Picture Setting
3. BNC Output Brightness
4. Resolution
5. Display Status Icons
6. Timebar Transparent
7. Enable Timebar
8. Video Output Interface
9. Default View
10. Sequence Dwell Time
11. Enable Audio Output
12. Event Monitor
13. Event Full Screen
Monitoring Dwell Time
14. Alarm Full Screen
Monitoring Dwell Time
15. Audio Output Linked to
Layout
The Layout window allows you to define the layout of each of the different views as they
are shown when selecting the different live views or the sequencing order.
The cameras are sequenced in numeric order by default. You can change the order of
the cameras for all monitors.
58
Description
Define the desired output mode.
Select one of the options from the drop-down list: Standard, Bright, Soft,
or Vivid, and click Apply.
Modify the video output brightness.
Adjust the scroll bar point to the desired level and click Apply.
Define the resolution of the selected monitor.
Select one of the options from the drop-down list and click Apply. The
selected resolution must be the same as that of the monitor.
Define whether the status icons are displayed. Default is Enable.
Select the transparency of the monitor output time bar on screen relative
to the background to make the time bar easier to read.
Check the box to enable/disable. Default is Disable.
Select whether the monitor output time bar appears on screen.
Check the box to enable/disable. Default is Enable.
Select the desired video output interface to apply: Main BNC or
VGA/HDMI. Default is VGA/HDMI.
The factory default multiview format displays all channels (2x2 layout for
the 4-channel TVR 12HD and 4x4 layout for the 8/16-channel TVR
12HD).
Set the length of time for which a camera image is displayed on the
selected monitor before moving to the next camera during sequencing.
Default is off ("No Switch").
Select whether to hear audio from cameras in both live and playback
mode. However, in order to be able to hear audio in playback, you must
enable the audio output setting. Default is Disable.
Check the box to enable/disable audio output.
Select which monitor will be the event monitor showing full screen
monitoring in case of events: HDMI/VGA, or Main BNC. Default is Main
analog.
Set the length of time during which an image is displayed on the event
monitor in full screen in case of an event. Default is 10 seconds.
Set the length of time during which an image is displayed on the event
monitor in full screen in case of an alarm. Default is 10 seconds.
Select from which monitor (Main BNC or VGA) audio can be heard.
TruVision DVR 12HD User Manual
Advertisement
Table of Contents
