Recorder And Keypad Functions - Interlogix TruVision DVR 12HD User Manual

Appendix E: KTD-405 keypad
2. Scroll through the menus with the
3. Change Operating Mode to Zone by moving the joystick down.
4. Quit the menu by pressing the
5. To connect it to the recorder, press the
recorder. The default value is "1".
6. To configure the recorder zone ID number, at the recorder enter the Monitor screen
by selecting Display Mode Settings
Zone ID, enter the zone ID value. The default value is "1".
Note: The zone ID value must be identical for the recorder and keypad.
The recorder is now connected to the KTD-405 keypad.

Recorder and keypad functions

The KTD-405U acts as a recorder control keypad when connected to the recorder. The
keypad mimics many of the functions available from the front panel of the recorder.
Unavailable recorder functions
The following TVR 12 functions are unavailable when using the keypad to control the
recorder:
 Export video

Shadow tour
 Select motion detection or tampering zones
 Archive records
 Capture video
If these functions are required, it is recommended to use a mouse in conjunction with
the keypad as all recorder functions will then be available.
Unavailable keypad functions
The following keypad buttons are unavailable when using the keypad to control the
recorder:
144
button until this menu appears:
seq button. The display will show, for example:
zone button and enter the ID number of the
in the main menu and select Monitor. Under
TruVision DVR 12HD User Manual