Toshiba E-Studio 2500C Manual page 82

5 Registering from TopAccess
Port Number (Command)
Enter the port number to be used for controls if you select "FTP" as the protocol. Generally
"-" is entered for the control port. When "-" is entered, the default port number, that is set for
FTP Client by an administrator, will be used. If you do not know the default port number for
FTP Client, ask your administrator and change this option if you want to use another port
number.
Network Path
Enter the network path to store a scanned file.
When you select "SMB" as the protocol, enter the network path to the network folder. For
example, to specify the "users\scanned" folder in the computer named "Client01", enter
"\\Client01\users\scanned\".
When you select "FTP" as the protocol, enter the directory in the specified FTP server. For
example, to specify the "ftp://192.168.1.1/user/scanned" FTP folder in the FTP server, enter
"user/scanned".
When you select "NetWare IPX/SPX" or "NetWare TCP/IP" as the protocol, enter the folder
path in the NetWare file server. For example, to specify the "sys\scan" folder in the NetWare
file server, enter "\sys\scan".
Login User Name
Enter the login user name to access a SMB server, an FTP server, or NetWare file server, if
required. When you select "FTP" as the protocol, an anonymous login is assumed if you
leave this field blank.
Password
Enter the password to access a SMB server, an FTP server, or NetWare file server, if
required.
Retype Password
Enter the same password again for a confirmation.
6) Destination — Remote 2
Check this box to save a scanned file to the Remote 2. How you can set this item depends
on how your administrator configured the Save as file settings.
If the Remote 2 does not allow to specify a network folder, you can only select "Use Adminis-
trator Settings". The protocol and the network path are displayed below this item.
If the Remote 2 allows to specify a network folder, you can specify the network folder set-
tings. Please refer to the description of the Remote 1 option for each item.
7) File Name
Select how the scanned file will be named. Select "DocYYMMDD" to name as it described,
or you can enter the desired file name in the field. When you want to add the date and time
in the file name, check the "Add the date and time to a file name" check box.
80 Managing Templates