Toshiba E-Studio 2500C Manual page 184

7 TopAccess Administrator Mode
5) Network Path
Enter the network path to store a file.
When you select "SMB" as the protocol, enter the network path to the network folder. For
example, to specify the "user/scanned" folder in the computer named "Client01", enter
"\\Client01\users\scanned\".
When you select "FTP" as the protocol, enter the directory in the specified FTP server. For
example, to specify the "ftp://192.168.1.1/user/scanned" FTP folder in the FTP server, enter
"user/scanned".
When you select "NetWare IPX/SPX" or "NetWare TCP/IP" as the protocol, enter the folder
path in the NetWare file server. For example, to specify the "sys\scan" folder in the NetWare
file server, enter "\sys\scan".
6) Login User Name
Enter the login user name to access a SMB server or an FTP server or NetWare file server, if
required. When you select "FTP" as the protocol, an anonymous login is assumed if you
leave this field blank.
7) Password
Enter the password to access a SMB server or an FTP server or NetWare file server, if
required. The space can be entered.
8) Retype Password
Enter the same password again for a confirmation.
9) Allow user to select network folder to be used as a destination
Select this to allow users to specify a network folder as a destination. Otherwise, select
"Allow the following network folder to be used as a destination".
If you want to allow users to specify either Remote 1 or Remote 2 to be used, select either that is
not set for the network folder as a destination and check "Allow the following network folder to be
used as a destination" of the selected folder.
Setting up the N/W-Fax Destination
You can configure a network folder to store documents that are sent using the N/W-Fax driver
with the Save as file option enabled.
1
2
1) Do not allow any network folder to be used as a destination
Select this to not allow any network folders to be used as Save as file destinations for N/W-
Faxes documents. When selected, users can only save an N/W-Fax document with the
Save as file option enabled to local storage.
2) Use Network Folder Destination
Select this to allow network folders to be used as Save as file destinations for N/W-Fax doc-
uments. When selected, set the N/W-Fax Folder settings to specify which network folder to
use.
182 Setting up from TopAccess