Toshiba E-Studio 2500C Manual page 179

17) Reduction
Select whether reducing the received fax image if it is larger than the effective printing area
of the recording paper.
18) Duplex Print
Select whether printing the received fax images on both sides of the recording paper.
19) Rotate Sort
Select whether rotating the output direction in the tray for each reception.
20) Recovery Transmit
Select whether re-transmitting a fax after failing the initially specified number of redial
attempts. When this is enabled, select the stored time length from 1 to 24 hours.
21) Journal Auto Print
Select whether automatically printing a transmission and reception journal after every trans-
mission is completed.
22) Memory Transmission Report
Select how to print a result report after a memory transmission.
- OFF — Select this to not print a memory transmission report.
- Always — Select this to print a memory transmission report with all page images for
each memory transmission is completed.
- ON ERROR — Select this to print a memory transmission report with all page images
only when the memory transmission is not successfully completed.
- Always (Print 1st Page Image) — Select this to print a memory transmission report with
the 1st page image for each memory transmission is completed.
- ON ERROR (Print 1st Page Image) — Select this to print a memory transmission report
with the 1st page image only when the memory transmission is not successful.
23) Multi Transmission Report
Select how to print a result report after a multi-address transmission.
- OFF — Select this to not print a multi-address transmission report.
- Always — Select this to print a multi-address transmission report with all page images
for each multi-address transmission is completed.
- ON ERROR — Select this to print a multi-address transmission report with all page
images only when the multi-address transmission is not successfully completed.
- Always (Print 1st Page Image) — Select this to print a multi-address transmission
report with the 1st page image for each multi-address transmission is completed.
- ON ERROR (Print 1st Page Image) — Select this to print a multi-address transmission
report with the 1st page image only when the multi-address transmission is not success-
ful.
24) Polling Report
Select how to print a result report after a multi-polling reception.
- OFF — Select this to not print a multi-polling report.
- Always — Select this to print a multi-polling report for each multi-polling reception.
- ON ERROR — Select this to print a multi-polling report only when the multi-polling recep-
tion is not successful.
25) Relay Originator
Select how to print a result report after a relay transmission.
- OFF — Select this to not print a relay station report.
- Always — Select this to print a relay station report with all page images for each relay
transmission is completed.
- ON ERROR — Select this to print a relay station report with all page images only when
the relay transmission is not successful.
- Always (Print 1st Page Image) — Select this to print a relay station report with the 1st
page image for each relay transmission is completed.
- ON ERROR (Print 1st Page Image) — Select this to print a relay station report with the
1st page image only when the relay transmission is not successful.
Setting up from TopAccess 177