Toshiba E-Studio 2500C Manual page 81

Encryption Level
Select the desired encryption level.
- 128-bit RC4 - Select this to set an encryption level to the one compatible with Acrobat
5.0, PDF V1.4.
40-bit RC4 — Select this to set an encryption level to the one compatible with Acrobat
3.0, PDF V1.1.
Authority
Check the desired types of authority for Encrypt PDF.
- Printing
- Change of Documents
- Content Copying or Extraction
- Content Extraction for accessibility
3) Destination — Use local folder
Select this to save a scanned file to the "FILE_SHARE" folder.
This option cannot be selected when the "Save to USB Media" option is selected.
4) Destination — Save to USB Media
Select this to save a scanned file to the USB media.
This option cannot be selected when the "Use local folder" option is selected.
This equipment has three USB connectors. All connectors can be used to store the data.
However, if more than one USB media are connected, the data will be stored in the USB
media that was connected first.
Storing to the USB media may take a time according to the amount of the pages.
5) Destination — Remote 1
Check this box to save a scanned file to the Remote 1. How you can set this item depends
on how your administrator configured the Save as file settings.
If the Remote 1 does not allow to specify a network folder, you can only select "Use Adminis-
trator Settings". The protocol and the network path are displayed below this item.
If the Remote 1 allows to specify a network folder, you can select "Use User Settings" and
specify the network folder settings by entering the following items:
Protocol
Select the protocol to be used for uploading a scanned file to the network folder.
- SMB — Select this to send a scanned file to the network folder using the SMB protocol.
- FTP — Select this to send a scanned file to the FTP server.
- NetWare IPX/SPX — Select this to send a scanned file to the NetWare file server using
the IPX/SPX protocol.
- NetWare TCP/IP — Select this to send a scanned file to the NetWare file server using
the TCP/IP protocol.
Server Name
When you select "FTP" as the protocol, enter the FTP server name or IP address where a
scanned file will be sent. For example, to send a scanned file to the "ftp://192.168.1.1/user/
scanned" FTP folder in the FTP server, enter "192.168.1.1" in this field. You can specify the
directory at the "Network Path" field.
When you select "NetWare IPX/SPX" as the protocol, enter the NetWare file server name or
Tree/Context name (when NDS is available).
When you select "NetWare TCP/IP" as the protocol, enter the IP address of the NetWare file
server.
Managing Templates 79