Time Table - Panasonic WJ-ND400 Operating Instructions Manual

Schedules

Time table

Use the procedure in this section to configure time table settings to schedule recording operations for each day of the week, and to assign each
time table to a recording program. You can configure up to six time tables, for specific days of the week. You also can configure settings for
externally controlled recording. Refer to page 47 for details about external recording.
1
Click the [Schedule] button on the setup menu.
2
On the sub-menu that appears, click [Time table].
This will display the schedule time table setting window.
3
Click a day of the week, [Daily], or [Ext.] to select the
type of setting you want to configure.
This will display the "Time table Setup" window.
Time table setup
Item
*1
Start
*1
End
Program
Event
FTP transmission by periodic
timer
FTP image transmission by
alarm
46
Settings
-- / 00:00 to 23:45
-- / 00:15 to 24:00
Program 1♦ to Program 8
Off / On♦
Off♦ / On
Off♦ / On
• To copy the time table currently configured for another
day of the week, select the day of the week with the "Copy
the other program" box and then click the [Copy] button.
Button Functions
[Copy] button : Copies the settings of the currently
selected day of the week.
[View] button : Displays the contents of the currently
selected program.
4
Configure the settings for each item.
Refer to "Time table setup" table for details about the
settings.
5
Click the [Set] button.
• The set time table and program are reflected.
Programs are displayed by color.
Description
Specifies the recording start time.
• No time after [23:46] is supported for the recording start time
setting.
• Repeat steps 1-5 to set programs of another day of the
week.
Specifies the recording end time.
Selects the recording program.
Set whether event operations are done when an event occurs.
• Event operations are not done if set to [Off].
Specifies whether images should be sent periodically to the
FTP server.
• If you select [On], also configure "FTP (page 56)".
Specifies whether images of the alarm location should be sent
to the FTP server when an event occurs.
• If you select [On], also configure "FTP (page 56)".