Handling The Hdd - Panasonic WJ-ND400 Operating Instructions Manual

Handling the HDD

Install the HDD unit provided (page 46).
The HDDs can be easily installed or removed from the HDD bay slots inside the front cover.
Contact your dealer for information on purchasing, installing, and replacing HDDs.
Important:
• HDDs are precise devices. Note the following precautions when handling them.
⋅ Do not subject them to vibration or impact.
⋅ Before touching an HDD, ground yourself against a metal object to eliminate any static electricity. Always hold the HDDs by the sides
when carrying them.
⋅ To prevent damage to components from static electricity, do not touch the parts or connectors on top of the HDDs.
• Contact your dealer for information on compatible HDDs.
Operation is only guaranteed with recommended HDDs.
• All the HDDs must be the same model.
Even if the capacity is the same, the space may be smaller by a few percent if the HDD models are different.
• Always install the HDDs in order starting with HDD 1.
(Disk slots in order from 1 to 9, starting on the left)
• In RAID5 or RAID6 modes, do not change the position of the HDD after starting operation.
Recorded data may not be read correctly if they are changed.
Item
Installation For individual HDD units
For extension units
Remove For individual HDD units
For extension units
Mode setting All units
Replacement & In single mode
recovery
In RAID mode
Error Recovery
*Extension unit is required for installation as a unit.
Using the Front Panel for Operations
Reference
Installing HDDs
*
Installing HDDs by unit
Removing HDDs
*
Removing HDDs by unit
Setting the HDD's Operation Mode
Installing HDDs
Removing HDDs
HDD error recovery
(In RAID mode)
Page
page 46
page 47
page 48
page 50
page 51
page 46
page 48
page 52
45