Using the Front Panel for Operations
Checking the IP Address
You can check the DHCP, IP address, subnet mask, gateway
#1, Client PC port (PC port): PT #2, and the Maintenance port: PT#3.
Use the arrow buttons (left or right) to switch between ports.
* Gateway and HTTP port settings are checked under the client PC port (PT #2).
The following shows the initial default values for the recorder network settings.
Item
DHCP
IP address
Subnet mask
Gateway
HTTP port
Check the settings by switching between screens using the following operations.
The LCD changes as follows when using the arrow buttons (up or down).
42
*
, and HTTP port
Camera port
Client PC port
−
192.168.0.250
255.255.255.0
−
−
[SET]
[ESC]
*
for each port. The following ports are displayed: Camera port: PT
Maintenance port
OFF
192.168.1.250
192.168.2.250
255.255.255.0
255.255.255.0
192.168.1.1
80
−
−
−