Panasonic WJ-ND400 Operating Instructions Manual page 192

♦Initial default
*1 Refer to "Recorder network settings (page 11)" for information on initial default settings.
Important:
• A different subnet should be set for each port.
• If DHCP is set to [On] and "SD Memory recording" is set, write requests to the camera's SD memory data may fail at startup. This occurs
because the response from the DHCP server is slow. Once the address has been obtained from the DHCP server, the error is resolved.
Port forwarding
Item
Port forwarding
Port number
♦Initial default
Settings
Off / On♦
Port number input
(Camera 1:60001♦ to
camera 64:60064♦)
Description
Specifies whether port forwarding is enabled.
When port forwarding is [On], specifies camera port numbers in
the range of 1 to 65535.
• Do not specify any of the following numbers for an HTTP
port number, FTP port number, site alarm port number, or
port forwarding port number.
20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161,
162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005,
10006, 10007
Network
63