Panasonic WJ-ND400 Operating Instructions Manual page 95

Connections
2 Port Operation
Using a HUB for Direct Connection
The PC connects to the camera using the camera port and the client PC port on the rear of the recorder.
Camera images input through the camera port are sent to the PC from the client PC port.
Important:
• Connect the camera to the camera port and the PC to the client PC port.
Connect the devices correctly. Otherwise, the transmission rate may be lowered.
26
PC
PC
HUB
Network camera
HUB
LAN cable
(Not provided: 10BASE-T /
100BASE-TX / 1 000BASE-T
category 5e, straight (NTSC model) /
category 7, straight (PAL model))
Recorder