Factory Settings - NETGEAR RAX200 User Manual

Nighthawk Tri-Band AX12 12-Stream AX WiFi Router

Factory settings

You can return the router to its factory settings. Use the end of a paper clip or a similar
object to press and hold the Reset button on the back of the router for at least seven
seconds. The router resets and returns to the factory configuration settings shown in
the following table.
Table 3. Factory default settings
Feature
Router login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Local network LAN IP
(LAN)
Subnet mask
DHCP server
DHCP range
Time zone
DHCP starting IP address
DHCP ending IP address
Time adjusted for daylight saving
time
Supplemental Information
Default setting
www.routerlogin.com or www.routerlogin.net
admin
password
Use default hardware address
1500
192.168.1.1
255.255.255.0
Enabled
192.168.1.2 to 192.168.1.254
Depends on your router's SKU
192.168.1.2
192.168.1.254
Disabled
173 User Manual