Making A Special Tool For Csic Board; Work Completion Checklist - Epson Stylus Photo R280 Service Manual

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50

4.1.4 Making a Special Tool for CSIC Board

The CSIC board (refer to p.76) can be easily removed by using a special tool. The
method for making the tool is described below.
1. Prepare a handle part of a clip, or a similar metal wire piece.
Clip
Figure 4-1. Making Special Tool for CSIC Board (1)
2. Bend the metal wire as shown below.
25mm
50mm
Figure 4-2. Making Special Tool for CSIC Board (2)
Chapter 4 Disassembly/Assembly
Handle part
7mm
Special Tool
4.1.4 Making a Special Tool for CSIC Board (Overview)

4.1.5 Work Completion Checklist

Whenever the printer is serviced, use the checklist shown below to confirm all work is
completed properly and the printer is ready to be returned to the user.
Make sure to always check the maintenance counter before disassembling the printer.
If the counter shows that some part or component has almost reached the end of its
service life, replace the part after receiving prior approval from the user.
Table 4-4. Work Completion Checklist
Classification Item
Printer Self-test Is the operation normal?
Unit
On-line Test Is the printing attempt successful?
Printhead Is ink discharged normally from all the
(print a nozzle nozzles?
check pattern)
Carriage Does the carriage move smoothly?
Mechanism
Is there any abnormal noise during its
operation?
Paper Feeding Is paper advanced smoothly?
Mechanism
No paper jamming?
No paper skew?
No multiple-sheet feeding?
No abnormal noise?
Is the paper path free of obstructions?
On-line Test On-line Test Is the operation normal?
Adjustment Specified Are all the adjustments correctly
Adjustments completed?
Lubrication Specified Has lubrication been applied at the
Lubrication specified points?
Is the amount of lubrication correct?
Function Firmware Version:
Version
Revision C
Check Point Status
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
OK / NG
55
Confidential