Epson Stylus Photo R280 Service Manual page 57

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50
Securing the Paper Support Assy
Prepare a commercially available 280cm-width x 80cm-length vinyl sheet to avoid
scratches on the exterior parts, and secure the sheet with strong tape.
Attach the strong tapes on both sides of the Paper Support Assy as shown in the figure
below.
1. Fold the vinyl sheet in half and insert the folded sheet between the Paper
Support Assy and the Printer Cover with the folded side facing the front side
of the printer, and secure the sheet with the strong tape as shown below.
2. Attach the left and right tapes to the Paper Support Assy and the side of the
housing.
35mm
Vinyl Sheet
(W280xH80)
Align the edges with the sides of Paper Support Assy
Figure 4-4. Securing the Paper Support Assy
Securing the Stacker Assy
(tape: 60mm x 1 pc., fold one end by 5mm)
Attach the strong tape to the center of the Stacker Assy as shown below.
The edge and backside of the Stacker have irregular steps. Make sure to attach the tape
along the shape.
Figure 4-5. Securing the Stacker Assy
Chapter 4 Disassembly/Assembly
(tape: 80mm x 3 pcs., fold one end by 5mm)
35mm
40mm
Folded end
30mm
Folded end
4.1.5 Work Completion Checklist (Overview)
Securing the Stacker Cover
(tape: 60mm x 1 pc., fold one end by 5mm)
Have a commercially available 280mm-width x 80mm-length vinyl sheet to cover the
exterior parts, and secure the sheet with strong tape.
• Fold the vinyl sheet in half, and insert the folded sheet between the Stacker Assy and
the Stacker Cover with the fold facing front side of the printer. Align the left and
right edges of the sheet with the edges of the Stacker Cover and secure the sheet with
the strong tape as shown below.
Align the edges with the sides of Stacker Assy
When the Stacker Cover
is closed
Figure 4-6. Securing the Stacker Cover
Revision C
Vinyl Sheet
(W280xH80)
40mm
Folded end
Confidential
57