Epson Stylus Photo R280 Service Manual page 76

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50
5. Using the special tool (see p.55) disengage the hook A of the CSIC Assy on
the left back of the Carriage Unit.
Hook A
[Back Side]
Special Tool
Figure 4-48. Removing the CSIC Assy (1)
6. Using the special tool (see p.55) disengage the hook B of the CSIC Assy on
the right back of the Carriage Unit.
7. Slide the CSIC Assy upward and remove the CSIC Board.
Removal Direction
Back Side of CSIC Assy
Hook A
Figure 4-49. Removing the CSIC Assy (2)
Chapter 4 Disassembly/Assembly
CSIC Assy
CSIC Assy
[Back Side]
Hook B
Special
Tool
Hook B
4.4.2 Printhead (Disassembling the Printer Mechanism)
Take extra care not to spill ink and contaminate the surroundings.
C A U T I O N
Be extremely careful not to touch the nozzle surface, the ink supply
needles and the Head Cover, otherwise the nozzles may get
clogged.
Printhead
Figure 4-50. Handling of the Printhead
8. Remove the three screws and remove the Printhead.
• Screw : C.B.P. M2.6x8 (tightening torque: 3-5 kgf.cm)
(The numbers shown in the figure indicate the order of tightening the screws.)
3
1
Figure 4-51. Removing the Printhead (1)
Revision C
Head Cover
Nozzle surface
(No.5)
2
Printhead
76
Confidential