Notes On Handling Dimm - Kyocera FS-1900 Service Manual

(3) Notes on handling DIMM

Before proceeding to install DIMM, to protect the main board and DIMMs, read the following
notes:
• Before touching a DIMM, touch a water pipe or other large metal object to
NOTE
discharge yourself of static electricity.
• While doing the work, it is recommended that you wear an antistatic wrist
strap.
• Touch the main board and DIMM only by the edges, not in the middle.
Figure 2-2-7 Handling DIMM
2-11
FS-1900