Notes On Handling Dimm - Kyocera FS-1050 - B/W Laser Printer Service Manual

(3) Notes on handling DIMM

Before proceeding to install DIMM, read the following notes for handling the main board and
DIMMs:
• Protect the electronics by taking these precautions:
• Before touching a DIMM, touch a water pipe or other large metal object to discharge yourself
of static electricity. While doing the work, it is recommended that you wear an antistatic wrist
strap.
• Touch the main board and DIMM only by the edges, not in the middle.
Figure 2-2-6 Handling DIMM
2-9
FS-1050