Kyocera FS-1900 Service Manual page 118

5. Gently flip down the magnet roller protective cover 4.
4
5
Figure 5-2-2 Closing the magnet roller protective cover
NOTE After removing the developer, seal it in the protective bag and place it on a flat
surface. Do not place the developer in a dusty area. If you ship the developer,
pack it in the shipping container specifically supplied with the printer. See section
Shipping the developer on page 3-13. Also do not touch the developing roller 5.
Do not place floppy disks near the developer.
FS-1900
5-5