Cleaning The Printer; Main Charger Unit - Kyocera FS-1900 Service Manual

3-1-3 Cleaning the printer

To avoid print quality problems, the following printer parts must be cleaned with every toner container
replacement.

(1) Main charger unit

The main charger unit should be cleaned in its two parts, the main charger wire and grid (See figure
below.) whenever the toner container is changed. Cleaning of the main charger can be done without
needing any tools thanks to its self-cleaning system.
Cleaning pad
Main charger wire
Grid
Shield
Cleanig knob
Figure 3-1-4 Main charger unit
FS-1900
3-8